The advanced evolution of the beloved MOD 1 V2. The innovation of the MOD 1 Plus lies in its switchable buffered, isolated inputs and outputs and with the use of high-quality isolation transformers, you'll experience a crystal-clear sound that captures and reproduces every nuance of your playing. This enhanced version also features phase switches for precise tonal adjustments, ensuring you achieve the perfect sound quality every time.
The Power MOD ISO DC 1 is a multi-power supply for e?ect pedals and provides up to 9 electrically isolated, highly filtered 9 VDC power connections and one 5V USB connection. It fits in a MOD slot on ROCKBOARD pedalboards, but, due to its removable front plate, it can also be used as a power supply for other pedalboards. The multi-power supply is designed to provide noiseless power to up to 9 e?ects pedals simultaneously. Sophisticated filtering technology e?ectively eliminates high-frequency noise. Separate short-circuit protection for each power slot protects the connected e?ects pedals from damage in the event of a short circuit. Separate LED indicate healthy connections for individual each slot. Should a short circuit occur, only the a?ected power slot is switched o?, leaving the rest of the e?ects rig operational.
- multi-power supply for e?ects pedals
- provides transformer isolated and highly filtered power slots
- fits in a MOD slot on RockBoard pedalboards
- compatible with most other pedalboards
- detachable front plate for mounting on top or underneath pedalboards
- advanced filter technology prevents high frequency noise
- external mains transformer prevents low frequency interference
- input polarity protection
- individual status LEDs and short circuit protection for all power slots
- 2 x strain relief clamps for connected cables
- input power: 24 VDC / 1.5 A
- outputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mA
- incl. 1 x 24 VDC power adapter (1.5 mA) with exchangeable multi-regional plug adapters
- (EU, UK, US/CA, AU/NZ), input voltage 100-240V AC
- incl. 9 x RockBoard® Flat Power Cable, 60 cm (for connecting e?ects pedals)
- dimensions (L x W x H): 175 x 85 x 47 mm / 6.9'' x 3.34'' x 1.85'' (with front plate) / 160 x 85 x 33 mm / 6.3'' x 3.34'' x 1.3'' (without front plate)
- weight: 500 g / 1.1 lbs
Mini Mod DC, patchbay with 1 x TRS input and 2 x TRS input that can be used in Return Send
The Mini Mounting MOD DC provides convenient access to the setup?s multi-power supply without the need for complicated routing of the power supply cable under the pedalboard. It fits perfectly into the RockBoard LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard series pedalboards. The central access to the power supply is provided by a DC 2.1 x 5.5 mm barrel thru jack. Since the Mini Mounting MOD DC uses through-connections between the inner and outer barrel jacks, it is also possible to supply power to external pedals, such as Wah, in the reverse direction. DC power supply cables or ''daisy chain'' distributors can be used instead of a multi-power supply to distribute power to the pedals. (Outputs A and B are connected in parallel).
Note: To avoid damage to the individual components, the total current consumption of all devices on the board should not exceed the output current of the connected multi-power supply or of the power adapter supplying the ''daisy chain'' connections. Make sure that the voltage and polarity of the external power supply match the requirements of the multi-power supply/pedals.
- Mini MOD DC
- mounting solution for RockBoard pedalboards and power supplies
- fits in the mounting hole for the RockBoard LED Light
- 1 x DC 2.1 x 5.5 mm barrel jack to 2 x DC 2.1 x 5.5 mm barrel jack
- no drill holes necessary
- dimensions: (W x D x H): 25 - 20 x 35 x 70 mm / 63/64''- 25/32'' x 1 3/8'' x 2 3/4''
- weight: 30 g / 0.07 lbs
- incl. mounting screws
Mini Mod TRS, patchbay with 1 x DC input and 2 x DC parallel input
The Mini Mounting MOD TRS provides convenient access to the signal supply of the pedals on the board. It fits perfectly into the RockBoard LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard series pedalboards. Central access to the signal supply is provided by a TRS 6.3 mm stereo jack socket. Since the Mini Mounting MOD TRS uses through-connections between the inner and outer jacks, it is also possible to pass signals in the reverse direction to external pedals, such as Wah. Also, by using TRS stereo jacks, send/return applications (A- = tip and B- = ring) are easy to realize.
- Mini MOD TRS
- mounting solution for RockBoard pedalboards
- fits in the mounting hole for the RockBoard LED Light
- 1 x 6.3mm (1/4'') TRS jack to 2 x 6.3 mm (1/4'') TRS jack
- no drill holes are necessary
- dimensions: (W x D x H): 25 - 20 x 35 x 70 mm - 63/64''- 25/32'' x 1 3/8'' x 2 3/4''
- weight: 50 g / 0.11 lbs
- incl. mounting screws
The Slot Cover offers an elegant solution for unused slots on your pedalboard and gives the pedalboard a professional and tidy appearance by concealing empty slots and creating a harmonious look. Made of high-quality material, the Slot Cover guarantees durability and resistance, even in demanding stage situations. Installation is child's play and requires no special tools.
Slot Cover for the RockBoard TRES, QUAD & CINQUE series
easy installation in unused slots of the RockBoard pedalboards
drilling templates for common plug sockets on the inside
harmonious and tidy appearance
powder-coated steel, black surface
incl. mounting screws and tools
Dimensions (L x W): 179 x 55 mm / 7 3/64'' x 2 11/64''
Weight: approx. 90 g / 0.20 lb.
Description Overview / Specification : all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboards compatible with a wide variety of other pedalboards acts as central access point to your effects setup establishes clean cable paths to and from the pedal board detachable front plate for mounting on top or underneath pedalboards 5 x 6,3 mm / ¼ TRS thru 1 x XLR thru (male front / female back) 1 x DC 2,1 x 5,5 mm barrel thru 1 x AC IEC thru (male front / female back) all connections mirrored on backside dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 7/8 x 3 3/8 x 3 15/16 dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 5/16 x 3 3/8 x 1 5/16 weight 450 g / 0.99 lbs incl. mounting screws, counter nuts and TX wrench
Description The PowerMOD 75 & 150 are specially designed Class D transistor amplifiers that can drive speaker cabinets directly from your pedalboard without an additional amplifier. The PowerMODs feature a 3-band EQ, switchable cabinet simulation for full-range speakers, and a mute function. The PowerMODs can be mounted directly into the MOD slot (available on all RockBoard® pedalboards except the DUO series) or onto pedalboards from other manufacturers, allowing for space-saving integration into any system
The combination of the compact, lightweight design, the powerful sound and the low-noise operation makes the RockBoard® PowerMODs an affordable and reliable pedalboard power amplifier for beginners, discerning musicians and experienced professionals.
Overview / Specification : -compact amplifier for pedalboards -can be directly mounted on into all RockBoard pedalboards equipped with MOD slots or on third-party pedalboards -solid-state design, class D amplifier circuitry -power (@1% THD): 118 W at 4 Ohm / 70 W at 8 Ohm -3-band EQ -front panel controls for Volume, Low, Mid, High -front-mounted Cab-Sim switch -front-mounted Mute switch -front-mounted 6.35 mm (1/4'') speaker output -front-mounted 3.5 mm (1/8'') headphone output -front-mounted 3.5 mm (1/8'') AUX IN input for external audio signals -front-mounted balanced XLR DI output -rear-mounted connection for included power supply adapter -rear-mounted instrument input -including 220 - 240 VAC power adapter, output 36 VDC, 4.16 A -dimensions (L x W x H) 175 x 116 x 47 mm / 6.88'' x 4.56'' x 1.85'' -weight 1.2 kg / 2.65 lbs (including power supply)
all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboards compatible with a wide variety of other pedalboards acts as central access point to your effects setup establishes clean cable paths to and from the pedal board detachable front plate for mounting on top or underneath pedalboards 4 x 6,3 mm / ¼ TRS thru 2 x 5-pin DIN MIDI thru 1 x USB Type A thru 1 x DC 2,1 x 5,5 mm barrel thru 1 x AC IEC thru (male front / female back) all connections mirrored on backside dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 7/8 x 3 3/8 x 3 15/16 dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 5/16 x 3 3/8 x 1 5/16 weight 420 g / 0.93 lbs incl. mounting screws, counter nuts and TX wrench
Description Overview / Specification : all-in-one patchbay for pedalboards fits MOD slots in RockBoard pedalboards compatible with a wide variety of other pedalboards acts as central access point to your effects setup establishes clean cable paths to and from the pedal board detachable front plate for mounting on top or underneath pedalboards 3 x 6,3 mm / ¼ TRS thru 2 x XLR thru (male front / female back) 1 x XLR thru (female front / male back) 1 x DC 2,1 x 5,5 mm barrel thru 1 x AC IEC thru (male front / female back) all connections mirrored on backside dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 7/8 x 3 3/8 x 3 15/16 dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 5/16 x 3 3/8 x 1 5/16 weight 450 g / 0.99 lbs incl. mounting screws, counter nuts and TX wrench
The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
wireless system receiver + patchbay for pedalboards
compatible with XVive U2 guitar wireless system
2.4 GHz ISM band for worldwide use
30 m / 100 ft. approx. range (without obstacles)
24 bit / 48 kHz uncompressed digital transmission
20 Hz - 20 kHz frequency range
5 ms latency
> 103 dB dynamic range
- 85 dBm RF sensitivity
0.2% total harmonic distortion
4 selectable channels
fits MOD slots in RockBoard pedalboards
compatible with a wide variety of other pedalboards
acts as central access point to your effects setup
detachable front plate for mounting on top or underneath pedalboards
4x 6.3 mm / 1/4'' stereo thru (TRS)
1x 6.3 mm / 1/4'' mono receiver audio output (TS)
1x DC 2.1 x 5.5 mm barrel thru
1x AC IEC thru
1x USB Type A charge output
power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
battery operation not supported
current draw 500 mA
passive operation possible (patchbay only, without wireless system)
dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64'' x 3 11/32'' x 1 27/32''
dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64'' x 3 11/32'' x 1 19/64''
weight 500 g / 1.1 lbs
incl. two antennas, USB charging cable, mounting screws and counter nuts
The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
wireless system receiver + patchbay for pedalboards
compatible with XVive U2 guitar wireless system
2.4 GHz ISM band for worldwide use
30 m / 100 ft. approx. range (without obstacles)
24 bit / 48 kHz uncompressed digital transmission
20 Hz - 20 kHz frequency range
5 ms latency
> 103 dB dynamic range
- 85 dBm RF sensitivity
0.2% total harmonic distortion
4 selectable channels
fits MOD slots in RockBoard pedalboards
compatible with a wide variety of other pedalboards
acts as central access point to your effects setup
detachable front plate for mounting on top or underneath pedalboards
4x 6.3 mm / 1/4'' stereo thru (TRS)
1x 6.3 mm / 1/4'' mono receiver audio output (TS)
1x DC 2.1 x 5.5 mm barrel thru
1x AC IEC thru
1x USB Type A charge output
power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
battery operation not supported
current draw 500 mA
passive operation possible (patchbay only, without wireless system)
dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64'' x 3 11/32'' x 1 27/32''
dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64'' x 3 11/32'' x 1 19/64''
weight 500 g / 1.1 lbs
incl. two antennas, USB charging cable, mounting screws and counter nuts
The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
wireless system receiver + patchbay for pedalboards, incl. XVive U2 wireless transmitter
compatible with XVive U2 guitar wireless system
2.4 GHz ISM band for worldwide use
30 m / 100 ft. approx. range (without obstacles)
24 bit / 48 kHz uncompressed digital transmission
20 Hz - 20 kHz frequency range
5 ms latency
> 103 dB dynamic range
- 85 dBm RF sensitivity
0.2% total harmonic distortion
4 selectable channels
fits MOD slots in RockBoard pedalboards
compatible with a wide variety of other pedalboards
acts as central access point to your effects setup
detachable front plate for mounting on top or underneath pedalboards
4x 6.3 mm / 1/4'' stereo thru (TRS)
1x 6.3 mm / 1/4'' mono receiver audio output (TS)
1x DC 2.1 x 5.5 mm barrel thru
1x AC IEC thru
1x USB Type A charge output
power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
battery operation not supported
current draw 500 mA
passive operation possible (patchbay only, without wireless system)
dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64'' x 3 11/32'' x 1 27/32''
dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64'' x 3 11/32'' x 1 19/64''
weight 500 g / 1.1 lbs
incl. XVive U2 wireless transmitter, two antennas, USB charging cable, mounting screws and counter nuts
